Echo Clean™Manual101223.png

PRODUCT DIAGRAM

 

Product Diagram (2).png

 

Beware sign.PNG  SAFETY INSTRUCTIONS

Please review the safety precautions below carefully to ensure proper performance of this product and your safety.

  • Do not inhale or drink cleaning water
  • If you are using the cleaning water to treat acne, eczema, or another skin issue, spray directly onto the skin or a cloth.
  • DO NOT SPRAY OR APPLY SODIUM HYPOCHLORITE (NaCIO) TO THE SKIN! 
  • To make Sodium Hypochlorite (NaClO), add 0.5 g of salt (1/8 tsp) to the water. Do not add salt to the same water twice or use more than the recommended salt dosage.  
  • Only use 99% refined salt.
  • Only fill the bottle to the max line.
  • Consider wearing a mask when spraying.
  • Only spray in areas with good ventilation.
  • Leaving leftover Hypochlorous Acid (HOCl) or Sodium Hypochlorite (NaClO) in your Echo Clean™ between uses will reduce the solution's effectiveness by 50% within one week.

Spot-test clothing, textiles, leather, and metals before fully cleaning these materials with the cleaning water. There is a risk of discoloration or deformation.

Water Droplet.PNG How to Clean

When the electrode has scale buildup or appears white, the product's performance is decreased.

  • To remove scale buildup from the electrode, put 1/4 cup (50 mL) of vinegar and 1/4 cup (50 mL) of tap water in the bottle.
  • Let the solution soak in the bottle for 30 minutes, and then rinse with clean tap water.

Water Droplet.PNG PACKAGE CONTENTS

Make sure all the components are in the package you have received.

  • Main Container
  • .05g or 1/8 teaspoon
  • Power Adaptor
  • USB-C Charging Chord

 

Echo Clean™Manual101223.png

 

SPECIFICATIONS

Product Name Echo Clean™
Voltage Input 100-240V, 50-60Hz
Output 5V 2A
  Acid water with 5 to 5.5 pH
  Hypochlorous Acid (HOCl) and Sodium Hypochlorite (NaClO) water
Production Cycle ~2-3 minutes
Material PC/ABS/PP
Volume 9.5 oz./280 mL
Weight 0.75 pounds

 

HOW TO USE

Echo Clean™Manual101223 (1).png

HOW TO USE:

1. Fill the bottle to the Max fill line (9.5 oz) with tap water(filtered water will not work).

2. Add Salt (if desired)

  • To create acid water with 5 to 5.5 pH, do not add salt.
  • To create sodium hypochlorite (NaClO), add 0.5 g (~1/8 teaspoon, spoon included) of salt.

3. Twist the Spray on, then shake the bottle vigorously with the combined

salt and water for about 10 seconds.

4. Plug the cord into Echo Clean and touch the power button.

5. When the cleaning water is complete, spray(mist) it either directly

on the intended area or on a dishcloth.

  • See the Precautions section for safety instructions.

OPERATION

Operation 1.PNG                           Operation 2.PNG

     Green Button light:                                             Blue LED lights:
      Product is on.                                                      Product is processing water

                                                                                  with no salt.

 

Operation 3.PNG                                         Operation 4.PNG

     Pink/Purple LED Lights:                                      Green LED lights:
     Product is processing                                           Process is complete.

     water with salt.

     

Operation 5.PNG

   Red LED flashing/alarms:

  Conductivity in the water is too high. Caused by filtered tap water. Don't add more          than one scoop of salt. Be sure to use the included Power Adapter.

 

NO SALT ADDED

USES

Cleaning water without salt may be used on the skin for issues such as acne or eczema.

  Processing Time LED Color pH of Acid Water ppm HOCl
1st Cycle 2 min. 50 sec. Blue 5.5 10
2nd Cycle 2 min. 50 sec. Blue 5 20

 

1ST CYCLE

The Echo Clean™ LED lights will turn blue while processing with no salt. After about 2 min. 50 sec., the LED lights will turn green, indicating that the process is complete. At this point, the pH of the water will be 5.5.

 

 

2ND CYCLE

The Echo Clean™ LED lights will turn blue while processing with no salt. After about 2 min. 50 sec., the LED lights will turn green, indicating that the process is complete. At this point, the pH of the water will be 5.

 

SALT ADDED

USES                                                                                          TYPE OF SALT

Only use acid water with salt on inorganic material.                 Only use 99% refined salt.

  Processing Time LED Color pH of Acid Water ppm NaClO
1st Cycle  1 min. 45 sec. Pink/Purple 5 ~50
2nd Cycle 1 min. 45 sec. Pink/Purple 5 ~100
3rd Cycle 1 min. 45 sec. Pink/Purple 5 ~200+

 

1 spoon = 0.5 gram

 

1ST CYCLE

The Echo Clean™ LED lights turn pink/purple while processing with 0.5 grams (1 spoon) of salt. After about 1 min. 45 sec., the process completes and the LED lights turn green. At this point, the water in the Echo Clean™ contains ~50 ppm of sodium hypochlorite (NaClO).

 

2ND CYCLE

If you would like a higher concentration of sodium hypochlorite (NaClO), run the Echo Clean™ through a second processing cycle. DO NOT ADD ANY MORE SALT.

The LED lights will turn pink/purple while processing. After about 1 min. 45 sec., once processing is finished, the LED lights will turn green.

 

At this point, the water in the Echo Clean™ contains ~100 ppm of sodium hypochlorite (NaClO).

 

3RD CYCLE

If you want a higher sodium hypochlorite (NaClO) concentration, run the Echo Clean™ through a third processing cycle. DO NOT ADD MORE SALT. 

The LED Lights will turn pink/purple while processing. After about 1 min. 45 sec., once processing is finished, the LED lights will turn green. 

 

At this point, the water in the Echo Clean contains -200+ ppm of sodium hypochlorite (NaClO).

Add comment

Article is closed for comments.